9720 replies to this topic

[Mito]

Put a new clip on the driveshaft boot as the old one had disappeared!

Swap the back wheels with the fronts

Poked a hole in the drivers side flitch panel

Edited by Mito, 21 March 2017 - 06:04 PM.

[Chris.Williams]

Put my lightened flywheel assembly on my motor, yummy!

[Greenwise]

Changed indicator lens as the old ones were a little lifeless!!!!

Attached Files

•  IMG_8082.JPG   42.21K   3 downloads

[cal844]

Went for a blast in the 1275, then took the 998 to be tweaked

[Bungleaio]

Collected the spare wheel from being refurbished. It still had the original tyre from 1993 on it so it wasn't in very good shape.

[nicklouse]

walked past it twice.

[minifreek1]

Drove it to pick my youngest up from school, always produces many smiles from the many parents and kids...

[RooBoonix]

Picked the engine up from the machine shop. Now to start building...

[phil hill]

walked past it twice.

Same here !! Although I did change the oil and filter on it last week.

Phil.

[Van13]

Removed toe board then realised could not get new one in because of jig fitted to make sure it went back in perfect what a dope I am

[panky]

Is this the most festive masking paper in the world?

 

 

 

 

Probably

 

Almost 2 litres of lovely flame red splurged on, a bit of cutting back and polishing required

Edited by panky, 23 March 2017 - 06:08 PM.

[Greenwise]

rewired spotlights

checked brakes

found core plug leaking 

[1968andyf]

New bearings and bushes fitted in radius arms no play now! New mini sport drilled discs and mintex m1144 pads will feel like a new car

[minifreek1]

New bearings and bushes fitted in radius arms no play now! New mini sport drilled discs and mintex m1144 pads will feel like a new car

 

It'll stop well now too :) I have the same on mine but find the pads are quite dusty....

 

 

 

But on mine....

 

Refitted the Maniflow LCB and centre pipe after changing to the standard exhaust maniflow and cat for the MoT last month....

 

Feels so much better, sounds good and isn't strangled by the standard manifold anymore :)

[Bungleaio]

For the first time since early 2010 I went out for a drive in my mini for no real reason.

 

The rebuild of my car started early last year it has only done a few miles but today I went out for a proper drive to give it a bit of a shakedown. I did 75 miles and I only had to stop to reconnect a speaker wire to the amp.

 

I seem to have an issue that when I flash the main beam the radio cuts out but if thats all I've got to sort then I'm very happy.