27 replies to this topic

[minidan]

hi, just ran outside and got a quick picture as its peeing down!! lol

couldnt find my tape so i used my other method. my finger lol.

thats about 50mm between carb inlet and bonnet lip although the ram pipe may fit under the lip.

so unless i can find an airfilter less than 50mm deep its going to have to be a rampipe with something over it

[minidan]

woops double post.

just found this:
https://www.sucarb.c...l.aspx?Id=33255

Edited by minidan, 29 March 2010 - 06:02 PM.

[Porn_Star]

they also have 30mm and 60mm

CLICK ME

[danrock101]

I brought a piprercross ram pipe from ebay for 99p starting bid
http://cgi.ebay.co.u...=item5ad842ddd0
http://cgi.ebay.co.u...=item2a00a194c3
mines the second one but for 99p obv
there's some more about too

[minidan]

quite like the red anodised ones on minispeed

i havent delt with minispeed for quite some time now, are they still reliable?

Edited by minidan, 29 March 2010 - 08:29 PM.

[luiji89]

Never use a ram pipe without any filter!
They're supposed to be used with sock fileters, with the hif44 a ram stack which goes inside the cone filter can be used, like this one:
http://www.minispare...p;title=RAMPIPE HIF44 BLUE PIPERC...

(Dont expect power/torque increase by fitting it...)

how does the filter connect to that?
toby

[HARBER07]

Could you not get one of them pancake filters in there Dan? A filter with no ram pipe is a lot better than the other way around.

[minidan]

what pancake filters? the last one i bought from minispares was about 2.5" deep

[HARBER07]

to be honest I've never fitted one so I have no idea, but i swear you could get some about 1.5" deep. Maybe not for a HIF44 though?

[minidan]

i suppose i could get a thinner pancake filter for an HS4 (if available) and modify it to fit the HIF44...

[mini93]

You're supposed to use ram pipes with a filter.

whoops!

[minidan]

just found this on minispares. could fit? or could be made to fit?
http://www.minispare.....20FILTER 1.75

[liirge]

you just need a sock filter! the slip over the pipes held on by a cable tie, make sure you leave ample room between the filter and the entry of the ram pipe.