60 replies to this topic

[cooper_shaz]

and

Attached Files

•  big2.jpg   26.15K   15 downloads

[cooper_shaz]

painted

Attached Files

•  big3.jpg   34.95K   105 downloads

[cooper_shaz]

amps

Attached Files

•  big4.jpg   32.69K   7 downloads

[cooper_shaz]

A different centre system.

Frame made and covered in fleece, ready for application of resin/bodyfiller mix

Attached Files

•  install2.jpg   14.22K   3 downloads

[cooper_shaz]

Resin set and holes for speakers cut out, ready to re-inforce the inside

Attached Files

•  install3.jpg   15.86K   4 downloads

[cooper_shaz]

Fill, sand, fill, sand, fill, sand, i think you get it, build up the shape and
get it smoooooooooth

Attached Files

•  install4.jpg   23.04K   7 downloads

[cooper_shaz]

Ok now that was easy...!!

nice and smoooooth, ready to sit in place of the back seat in the mini...!!

test fit... weighs a TON...!!

and then into paint we go...!!

Attached Files

•  install5.jpg   24.9K   64 downloads

[cooper_shaz]

Painted up and ready to secure in place..
but first lets fit up everything in and get all the screw holes etc spot on...

not much room in the car after this is in..

alll isnt it lovely...

I'm going to call it... the sound propelled mini...!

Attached Files

•  install6.jpg   23.46K   13 downloads

[cooper_shaz]

There ya goes.....!!
All together say ahhhhhhhhhh :grin:

Attached Files

•  install7.jpg   25.9K   20 downloads

[wobbit]

wow looks great! is that in your mini?

[cooper_shaz]

It was meant to be an install for the clubby estate, but along the planning route it got re-designed to fit a honda civic..

I have actually not done the install for my car yet as every time i start the project gets hi-jacked by someone and I end up selling the install and adapting it for their car...!!

The mini's time will come....!!! Probably..! hopefully..!

[Volf]

Holy C**p! I must print all this off and get started! Thanks for all the info! Very helpful! *Goes to print but dosnt have any ink* Noooo

[PhoenixSimon]

thats really good stuff, thanks a million cooper shaz I will give it a whirl.
cheers Simon

[Martin123]

Yes once i get my mini i am goin to give it a go
What sort of filler did you use? any recomendations?
also i have used spray glue before and some spray glue is terrible, any recomendations for good spray glue?

1 more question when you said for big creases you fibre glass, is that the fibreglass sheets you can buy from halfords also, and i also found the resin but not any hardener?

cheers
Martin.

Edited by Martin123, 17 October 2006 - 04:45 PM.

[bloomers]

is it ok to mould the whole unit into the car, I am doing a set up in the rear pockets next to the arches, which will cover most of the side.......but im going to fix it into the car as i go, is this ok? and i will be covering it with carpet so it doesn't need to be too smooth

Ian