1635 replies to this topic

[Pauly]

Genuine w&p's finish about the bumper lip, no genuine/copys go under.

Paul.

[antoenail]

does anyone have any pictures of miis on 10x6 revolites? or can you point me in the right dirction if there are already pictures posted please!

Thanks!

[kvn5]

Here are some 10" wheels I bought several years ago. They are still sitting in my closet until my mini is finished. They are 3 piece wheels with a billet center. They were made by Carl Austin of force-racing. Can't wait to finish the car to throw these babies on!

[miniadventure]

Got to get me sum of them.

[1275GTS]

does anyone have any pictures of miis on 10x6 revolites? or can you point me in the right dirction if there are already pictures posted please!

Thanks!

heres a pic of my clubman with 10*6 revoltions which are similar to revolites. if you want a set of revolites i have a set (5 off) of 10*6 revolites.

[Dingle]

Right, I'm bored and want 10" rims on my mini. I have decided to go with Minilife alloys from Minispares and need to know if 5x10" are a straight swap for my original wheels. My mini is a 1975 standard mini with no arches and just the chrome trim and drums all round. Will the 5x10s fit or do I need to go with 4.5x10's?

Any help moochos appreicated

[ferrit]

Right, I'm bored and want 10" rims on my mini. I have decided to go with Minilife alloys from Minispares and need to know if 5x10" are a straight swap for my original wheels. My mini is a 1975 standard mini with no arches and just the chrome trim and drums all round. Will the 5x10s fit or do I need to go with 4.5x10's?

Any help moochos appreicated

The 41/2x10s are ok to run archless if you have discs so i would imagine 5x10s would be fine if you have drums all round.

[karlos_junior]

 DSC_0132.JPG   500.44K   44 downloads
I was suprise not to see any off these in here, so heres mine..
 DSC_0125.JPG   571.15K   109 downloads

Edited by karlos_junior, 06 July 2009 - 10:12 PM.

[fastcarl]

 DSC_0132.JPG   500.44K   44 downloads
I was suprise not to see any off these in here, so heres mine..
 DSC_0125.JPG   571.15K   109 downloads

what make are these.



carl

[level7]

 DSC_0132.JPG   500.44K   44 downloads
I was suprise not to see any off these in here, so heres mine..
 DSC_0125.JPG   571.15K   109 downloads

Hi Karlos_junior those are the same wheels we have now got for our elf project, got a set with tyres for free
Where in NZ are you? Are you going to the 50th in Nelson?

[level7]

 DSC_0132.JPG   500.44K   44 downloads
I was suprise not to see any off these in here, so heres mine..
 DSC_0125.JPG   571.15K   109 downloads

what make are these.



carl

I think you will find the are cheviot hotwires in 5 x 10

[jackson-minis]

someone's already posted pictures of 10x6 ultralites but here's mine just finished.
gazz.

Attached Files

•  ultralites.jpg   166.06K   128 downloads
•  090516_1610477.jpg   361.77K   149 downloads

[Retro_10s]

cheviot hot wires are very rare over here - only ever seen one set, lovely lovely wheels.

[wolfie]

Here are some 10" wheels I bought several years ago. They are still sitting in my closet until my mini is finished. They are 3 piece wheels with a billet center. They were made by Carl Austin of force-racing. Can't wait to finish the car to throw these babies on!

Hardly several!
These were released by carl 3 years ago to the month

[1275GTS]

i'm thinking of fiiting these to mine



they are 100+ 4 spokes

or these



they are 12 spoke compomotives