452 replies to this topic

[Alburglar]

Hooray!
At 8.22am my kit turned up on a pallet!

Attached Files

•  100_0072.JPG   340.66K   43 downloads

[Alburglar]

It was a pig to get into my garage, especialy as I was on my own with a sprained wrist, so took me till lunch time to get it to it's temporary home in my garage.

I'm really impressed with the quality of the kit.
This pic shows passenger side rear hub with disk, caliper, anti-roll bar, drive shaft and coil-overs.

Neat isn't it.

Attached Files

•  100_0073.JPG   378.36K   41 downloads

[lewis]

must be like christmas all over, is it ready to start fitting now or you still got jobs to finish

[Jordie]

loooks sweeet.

[Alburglar]

And look how cool reverse looks now it's all built up.
The starter motor simply moves the big black cog which turns the drive shaft backwards. Simple

Attached Files

•  100_0074.JPG   310.83K   30 downloads

[Alburglar]

And here is one of the re-conditioned 4 pots. Nicely sprayed up in gold.

Attached Files

•  100_0077.JPG   324.93K   23 downloads

[Alburglar]

Yes it is like christmas because the floor panel I need to weld in turned up too. Just going out to do that now so I can put kit in the car asap.

[Alburglar]

...and the Wide Open Throttle Microswitch for the nitrous turned up today too!

[lewis]

bladdy hell, father christmas!! I like the calipers, good luck fitting all this by the way, will look brilliant when its finished, you should try for a mag feature

[Dom]

exciting stuff

[Alburglar]

I think my floor was a repair panel placed over the original floor because it had two layers of metal??????
Both were rotten see pic,
but is the floor only supposed to have one layer, because that it is all it will have once i've put new repair panel in???????????

Attached Files

•  100_0085.JPG   396.4K   9 downloads

[Alburglar]

Was hoping to have finnished all my welding today, but my grinder burnt itself out once I was at this stage. How annoying!

Bought a new one just before shops shut so can continue tommorrow.

Attached Files

•  100_0086.JPG   252.79K   10 downloads

[Alburglar]

Here is a pic of what Micro swtch (right) and fogger nozzle for Nitrous.

Attached Files

•  100_0083.JPG   239.23K   12 downloads

[Alburglar]

My N20 jets turned up too.
I bought a 15hp and 18bhp ones for my mates minimoto and got 75bhp and 100bhp jets for smurfy. But I think I will swap the 100bhp jets for some 50bhp ones.
Don't want to detonate myself do i?

Attached Files

•  100_0084.JPG   313.06K   9 downloads

[Alburglar]

Sorry folks, but still don't have anything sexy to show you. Today I dropped off my arches to my local friendly garage for a friendly priced spray.
Also got them to take off the castle nuts on my metro hubs, as it is nightmare to do it without fixing them to the subframe first and I am not in a position to do that yet.
Plus my wrist is buggered, so am a feeble weekling at the mo.

Got the floor to a stage where I am happy to weld the panel in tommorrow.

Attached Files

•  100_0097.JPG   321.27K   12 downloads