By the way my memory may be fading and I think the rears may be fed from the top of the master cylinder and the fronts from the bottom. I will confirm later as it's quite important!
Brake Line Set Up?
Started by
L.Hurst
, Nov 10 2009 06:42 PM
16 replies to this topic
#16
Wil_h
-
- Members
-
- 3,244 posts
Up Into Fourth
Posted 12 November 2009 - 12:24 PM
As above chuck away the standard proportion valve (or whatever it's called) the one with 4 pipes in and replace as shown below.
By the way my memory may be fading and I think the rears may be fed from the top of the master cylinder and the fronts from the bottom. I will confirm later as it's quite important!
By the way my memory may be fading and I think the rears may be fed from the top of the master cylinder and the fronts from the bottom. I will confirm later as it's quite important!
#17
L.Hurst
-
- Members
-
- 192 posts
Mini Mad
- Local Club: BMC
Posted 12 November 2009 - 10:47 PM
Great pics, cheers for that.
I like that two flex bits out the back of the seats and down to brakes. Looks smart!!!
Think I will be looking for a bias valve then.
I like that two flex bits out the back of the seats and down to brakes. Looks smart!!!
Think I will be looking for a bias valve then.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
