Hi all,
When my windscreen wipers wipe they are fine wiping at the top but when they reach the bottom they go off the window by about an inch.
Is there any way of adjusting them?
Cheers,
Charlie
Windscreen Wipers
Started by
CharlieBrown
, Mar 24 2004 01:22 PM
7 replies to this topic
#1
Posted 24 March 2004 - 01:22 PM
#2
Posted 24 March 2004 - 01:41 PM
i know there is, but cant remember it :sad: think i saw it in the haynes manual tho'
#3
Posted 24 March 2004 - 05:13 PM
The arms are splined onto the wiper spindles.
Lift the arms up away from the screen and for want of a better word 'wriggle' them off. Then simply push them back in the right place.
Be careful the springs are very strong.
Siggy
Lift the arms up away from the screen and for want of a better word 'wriggle' them off. Then simply push them back in the right place.
Be careful the springs are very strong.
Siggy
#4
Posted 24 March 2004 - 06:03 PM
also under the arm on the spindle there is a small clip, lift this clip and the arms will fly off easy
#5
Posted 25 March 2004 - 10:20 AM
Cheers guys, I will try to fix them.
However when the wipers are in the up position they stop in the right place, if i move then as you instruct I might get the same problem but when the wipers are at the top????
However when the wipers are in the up position they stop in the right place, if i move then as you instruct I might get the same problem but when the wipers are at the top????
#6
Posted 25 March 2004 - 01:10 PM
ermmmm
if that dont work, look along the lines of the motor
if that dont work, look along the lines of the motor
#7
Posted 25 March 2004 - 01:41 PM
really really stupid I no but could they not be mini wipers you got fitted? :nugget:
#8
Posted 25 March 2004 - 08:57 PM
A fair point Jules,
They look like mini wipers, they came with the mini when i got it.
I only noticed the wipers going too far resently, still I could just not noticed it??????
They look like mini wipers, they came with the mini when i got it.
I only noticed the wipers going too far resently, still I could just not noticed it??????
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users