52 replies to this topic

[CobraV8]

Here is my car with the wheels it had when I bought it, 12x5 (or maybe 4.5?) with no arches:

[captainjack15]

12X6 SuperStars

Edit: Don't worry, It'll be lowered soon

Edited by captainjack15, 23 August 2009 - 09:32 PM.

[ferrit]

Any opportunity to reel some photos out:-

Monte with original fatpack arches and 6x12 deep dish minilights


Paddy with genuine W&Ps and same wheels as above (They stick out to much for my liking hence why I scrapped this idea)

[Minigirl]

[Kam]

12x5 deep dish supalights (old wheels) with 165/60/12 and standard rover plastic arches




12x6 deep dish minilights (current wheels) with 165/60/12 and standard rover plastic arches

Not included is your mini friendly MOT center

[rimmer1993]

Love how much they stick out

[me madjoe 90]

12x5 deep dish supalights (old wheels) with 165/60/12 and standard rover plastic arches



12x6 deep dish minilights (current wheels) with 165/60/12 and standard rover plastic arches

Not included is your mini friendly MOT center

ur going to need some bigger arches come testing time my freind

[ROBBIE 1]

6x12's



5x12's



Paul.

HI CAN ANYONE HELP ME IM NEW IN HERE TOTALLY LOST ! ! LOLOL ANYWAYS HERES MY QUESTION IM JUST TO EMBARK ON A MINI PROJECT WITH A DIFFERANCE ! ! I WOULD LIKE TO PRODUCE A MINI THATS QUITE ABIT DIFFERANT ,THE PLAN IS TO FIT A MODIFIED ZEEMAX BODY KIT ,AIR SUSPENSION ,AND WAIT FOR IT 15INCH BBS RS ALLOYS WITH STREACHED TYRES ,THE IDEA BEING IT SITS ON THE FLOOR WITH THE ALLOYS WELL UP IN THE ARCH !! NOW THE QUESTION IM ASKING IS AS FOLLOWS WITH A STANDARD MINI WHEEL HUB SETUP ! CAN I FIT A CUSTOM BRACKET WITH THE CORRECT PCD TO ACCEPT THE BBS RS WHEEL ?? PLUS CAN I ADD ALOT OF CAMBER TO THE HUB ??? SO TO GET THE WHEEL SITTING RIGHT UNDER THE ARCH ?? I KNOW YOU LOT ARE GANNA FREEK ! ! I KNOW IM GANNA HAVE TO CHOP BODYWORK ETC BRING THE BODYKIT OUT ETC ! ALL IM ASKING IS CAN IT BE DONE ??? THANKS FOR ALL YOUR HELP !!!!

[shorty]

HI CAN ANYONE HELP ME IM NEW IN HERE TOTALLY LOST ! ! LOLOL ANYWAYS HERES MY QUESTION IM JUST TO EMBARK ON A MINI PROJECT WITH A DIFFERANCE ! ! I WOULD LIKE TO PRODUCE A MINI THATS QUITE ABIT DIFFERANT ,THE PLAN IS TO FIT A MODIFIED ZEEMAX BODY KIT ,AIR SUSPENSION ,AND WAIT FOR IT 15INCH BBS RS ALLOYS WITH STREACHED TYRES ,THE IDEA BEING IT SITS ON THE FLOOR WITH THE ALLOYS WELL UP IN THE ARCH !! NOW THE QUESTION IM ASKING IS AS FOLLOWS WITH A STANDARD MINI WHEEL HUB SETUP ! CAN I FIT A CUSTOM BRACKET WITH THE CORRECT PCD TO ACCEPT THE BBS RS WHEEL ?? PLUS CAN I ADD ALOT OF CAMBER TO THE HUB ??? SO TO GET THE WHEEL SITTING RIGHT UNDER THE ARCH ?? I KNOW YOU LOT ARE GANNA FREEK ! ! I KNOW IM GANNA HAVE TO CHOP BODYWORK ETC BRING THE BODYKIT OUT ETC ! ALL IM ASKING IS CAN IT BE DONE ??? THANKS FOR ALL YOUR HELP !!!!

Firstly CAN YOU NOT RIGHT ALL IN CAPS AS IT MAKES IT VERY ANNOYING TO READ, 15 inch alloys can be fitted onto a mini there was a mini a MITP which had larger than life alloys fitted to it which looked to be 15 maybe 16
your best bet will be to start your on thread in the technical section.

[Kam]

ur going to need some bigger arches come testing time my freind

Nah I'll be fine, I'll borrow my mates factory 4.5 minilites and throw them on, job done just, he doesnt know this yet but soon will

I would say it looks exgagerated in the pics, but it dont

[ferrit]

the MOT man is the least of your worries. If Mr Plod notice this or you have an accident you could be up *melon* creak without a paddle. But hey its your car.

Personally I dont think the wheels hanging out of the arches is a good look at all, in my opinion it looks as if the wrong bits have been bought or whoever couldnt be bothered to do the job right in the first place.

Wheels should fill the arches just so, any more or any less and it looks cob.

[Icey]

12 x 5 GB Alloys with standard rover arches

[tuktuk]

with W&P on

Edited by tuktuk, 24 August 2009 - 07:50 AM.

[rimmer1993]

with W&P on

Are they 12x6 revos?

[tuktuk]

yep