63 replies to this topic

[racer36]

ahh now i get it !

is there any chance of using the bellhousing and bits from 200tdi engine? also pics are commin in just a sec

the input shaft is different, I believe it is possible to strip down and change the input shaft but if you have the discovery box there then its only a couple of hours job to drop it out the discovery and fit into the 90

the engine is sat on the floor complete with gearbox and wiring(everything needed) the problem is i would need to mod my seatbox like you did wouldent i?

thanks also ill post a pic of the wiring i meant now

[racer36]

wiring pics -this is out of the dash

[modified90]

this is actually my thread my tmf account and msn started messing up(along with ebay) so renewed them all instead

progress is going to be slower as im waiting for bits

accidentlty pulled the piston out of the (master?)cylinder earlia so now have to take the gearbox off to get it back on,while im doing that ill weld the clutch arm as the centres break and put in a new thrust bearing

some wiring has been done along with powersteering pipes ect

[modified90]

progress is still comming along but the mini is taking priority at the moment !