45 replies to this topic

[Blitz-Voodoo]

Oh.. Yet i'm rear wheel drive.

Is the vehicle which drive RWD?

[bebbinator]

no mine is a mini fwd!!

[Blitz-Voodoo]

Oh... I'd of thought that with my gearbox being in the rear of the car that the reverse would be opposite.

Saying that it's been one of those days. haha

[bebbinator]

lol well i hope that i have been of some help to you

[Blitz-Voodoo]

A great help, thanks.

[bebbinator]

all the best mate

[Blitz-Voodoo]

Having now removed the 2 pins & placed the KAD it's the orginal place but not all the way did. The reason for this was a test to see if it fitted.
I'm finding it hard to find reverse. It's finding 1st, 2nd, 3rd & 4th.. but not reverse.

Please note:- I did the above without the engine running.

I can't get over how "short" it's made the stick feel.

[bebbinator]

i know but you will get used to it i found it strange too

[Blitz-Voodoo]

It just seems to be a VERY tight fit..I've a feeling i'll have to bag it into place with a hammer, it's that tight.

Is that correct?

My fear is not being able have to have/find reverse.

[bebbinator]

i hade to tap mine down with a hammer

[Blitz-Voodoo]

A tap or a few good cracks? lol

It feels tight, which i suppose is a good thing - Secure.

Also that might be why i can't find reverse the fact that the short shift itsn't in the correct position.

[Lukie-J]

Don't have any experience with them myself but was looking at buying one,
If it's a newer one it says on the website that you need to lift the collar below the gearknob to select reverse?
This might be why you're having trouble?
http://www.kad-uk.com/accessories.htm

[bebbinator]

i gave i firm tap a few times

[Blitz-Voodoo]

Don't have any experience with them myself but was looking at buying one,
If it's a newer one it says on the website that you need to lift the collar below the gearknob to select reverse?
This might be why you're having trouble?
http://www.kad-uk.com/accessories.htm

I'm lifting up the collar. I've a feeling it's not selecting gear because the gear stick isn't in the correct position (all the way down)

i gave i firm tap a few times

I'll take some more photo's before i start going sick with a hammer.

Cheers

[Guess-Works.com]

In the blitz you already have a cut off gear shift which makes it short, I suspect with the quichift kit on it'll be impossibly short ( unless you retain the std length of the stick ) and then the top of the stick may be uncomfortably high ?