45 replies to this topic

[Blitz-Voodoo]

Hi,

I bought a used KAD Mini Short shift for my Voodoo Blitz (see below)



How do i fit it?

[bebbinator]

easy take the old one off by removing the 2 pins holding the old one on. then i taped the selector box to take very small bolts and fitted the kad one onto it

[Blitz-Voodoo]

Can i do this while it's connected to the car? I see you have taken yours out.

[Blitz-Voodoo]

Oh & another thing the buggy (see photo's) is RWD, meaning the selector is the opposite way.

Ideas?

[bebbinator]

is yours on the inside or the outside if it is on the inside the you probably could do it

[Blitz-Voodoo]

Do you mean the light fitting type fitment? Bayonet

[Blitz-Voodoo]

[Blitz-Voodoo]

[bebbinator]

cancel that beter still take the pins out of the selector box then see if they will fit into the kad selector if they do then just fit it with the pins of not dtill the holes in the kad selector so that the pins will fit :)

[Blitz-Voodoo]

[Blitz-Voodoo]

Am i right in thinking that the pins will just knock/pull out? See photo above

[Blitz-Voodoo]

[bebbinator]

yea what i did was tap them qentily inwards untill you can see them on the inside then hold them with a pair of mole grips and tap them all the way through with a hammer and punch.

[Blitz-Voodoo]

Will the lift up (reverse) mechanism work the same?

My revere is bottom right. I take it yours is top left?

[bebbinator]

no my reverse is bottom right as well so they should be the same