Kad Mini Short Shift
Started by
Blitz-Voodoo
, Jan 21 2009 02:00 PM
45 replies to this topic
#1
Posted 21 January 2009 - 02:00 PM
Hi,
I bought a used KAD Mini Short shift for my Voodoo Blitz (see below)
How do i fit it?
I bought a used KAD Mini Short shift for my Voodoo Blitz (see below)
How do i fit it?
#2
Posted 21 January 2009 - 02:26 PM
easy take the old one off by removing the 2 pins holding the old one on. then i taped the selector box to take very small bolts and fitted the kad one onto it
#3
Posted 21 January 2009 - 02:34 PM
Can i do this while it's connected to the car? I see you have taken yours out.
#4
Posted 21 January 2009 - 02:37 PM
Oh & another thing the buggy (see photo's) is RWD, meaning the selector is the opposite way.
Ideas?
Ideas?
#5
Posted 21 January 2009 - 02:38 PM
is yours on the inside or the outside if it is on the inside the you probably could do it
#6
Posted 21 January 2009 - 02:48 PM
Do you mean the light fitting type fitment? Bayonet
#7
Posted 21 January 2009 - 02:52 PM
#8
Posted 21 January 2009 - 02:56 PM
#9
Posted 21 January 2009 - 02:57 PM
cancel that beter still take the pins out of the selector box then see if they will fit into the kad selector if they do then just fit it with the pins of not dtill the holes in the kad selector so that the pins will fit :)
#10
Posted 21 January 2009 - 02:57 PM
#11
Posted 21 January 2009 - 02:59 PM
Am i right in thinking that the pins will just knock/pull out? See photo above
#12
Posted 21 January 2009 - 03:00 PM
#13
Posted 21 January 2009 - 03:03 PM
yea what i did was tap them qentily inwards untill you can see them on the inside then hold them with a pair of mole grips and tap them all the way through with a hammer and punch.
#14
Posted 21 January 2009 - 03:19 PM
Will the lift up (reverse) mechanism work the same?
My revere is bottom right. I take it yours is top left?
My revere is bottom right. I take it yours is top left?
#15
Posted 21 January 2009 - 03:26 PM
no my reverse is bottom right as well so they should be the same
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users