Jump to content


Community Status Updates


Photo

1984mini25

3 hours in and i'm ready to pull the flywheel off, moment of truth...
Feb 27 2015 02:23 PM
  • Italianjob's Photo
    Italianjob
    good luck!
    Feb 27 2015 04:10 PM
  • 1984mini25's Photo
    1984mini25
    And.... I can see nothing wrong apart from the cage on the release bearing has worn away at the plunger witch would account for the rattle
    Feb 27 2015 06:22 PM
Photo

Kieranlee999

what happened to the thread about batteries? i cant find it now.
Feb 27 2015 01:46 PM
  • Anthony30's Photo
    Anthony30
    I would get that sorted before the MOT. It's technically a fail, due to the battery being insecure, and unsafe, IMO.
    Feb 27 2015 02:01 PM
  • cal844's Photo
    cal844
    Unsecure?? Cable ties ;) also use an 096 battery (you may need to cut the bottom clamps off so it fiuts the box)
    Feb 27 2015 05:01 PM
  • Kieranlee999's Photo
    Kieranlee999
    It didn't have one at the last mot and it passed :) I was going to get a 096 I think it it is from eurocarparts
    Feb 27 2015 06:41 PM
Photo

littlemissmagic

Mini could hopefully be painted by end of next week! Excited and cannot wait until hes finally back on the road!
Feb 27 2015 12:33 PM
Photo

matt050990

Its Only Flipping Friday!
Feb 27 2015 07:51 AM
  • dave1010's Photo
    dave1010
    Just checked my bank and I think the company I've just left has done me out of a couple of hundred squid! :(
    Feb 27 2015 09:00 AM
  • matt050990's Photo
    matt050990
    BAST**DS!!!!!
    That's what loyalty gets you!
    Feb 27 2015 09:09 AM
  • dave1010's Photo
    dave1010
    Exactly, will have to wait until my last wage slip comes through the post to check before I ring and give them sh*t .
    Feb 27 2015 02:08 PM
Photo

Vinay-RS

I now have four steel wheels :D
Feb 27 2015 07:44 AM
  • Vinay-RS's Photo
    Vinay-RS
    My mate has 4.5" reverse rims on 165s on his mk1 cooper and they look sick!
    Feb 27 2015 08:45 AM
  • Vinay-RS's Photo
    Vinay-RS
    what is the standard width? 3.5"
    Feb 27 2015 08:48 AM
  • matt050990's Photo
    matt050990
    Not a clue mate, I like the way my 12"s sit with the arches, flows nicely but so tempted on banded
    Feb 27 2015 08:50 AM
Photo

kyle9832

Just been took for a right mug! Was all set on buying some new wheels, a price was agreed and confirmed, collection was alright for saturday, cancelled plans but only to have my messages ignored and sold to someone else... :(
Feb 26 2015 10:43 PM
  • RossKnight's Photo
    RossKnight
    Worst thing ever
    Feb 26 2015 10:57 PM
  • Ben_O's Photo
    Ben_O
    It's gutting when that happens. even worse if it is something that is hard to find. that happened to me recently on something i had been searching for, for years
    Feb 26 2015 11:16 PM
  • Perrylawrence96's Photo
    Perrylawrence96
    happened to me on a Rover 220 turbo in green, was gutted theyre so hard to find
    Feb 27 2015 10:47 AM
Photo

RossKnight

Easy enough to install a 30A socket?
Feb 26 2015 09:55 PM
  • bluemini17's Photo
    bluemini17
    depends on cable run and consumer unit position, but generally speaking ,, yes
    Feb 26 2015 11:08 PM
  • RossKnight's Photo
    RossKnight
    Consumer unit is on the wall the otherside of where I'll be putting the shed haha. Cable run will literally need to be about a meter... Need to work out which type of breaker I'll need and cable size? It's for a compressor only rated for 30A plugs
    Feb 26 2015 11:20 PM
  • djdanmk's Photo
    djdanmk
    4mm or 6mm cable and a 32A MCB.
    Feb 27 2015 06:22 AM
Photo

1984mini25

debating upon wheather or not I should pull the cover off to see how bad my clutch is...
Feb 26 2015 09:52 PM
  • 1984mini25's Photo
    1984mini25
    that the burning smell after driving and slippage in 3rd turns out the clutch needs replacing
    Feb 26 2015 10:19 PM
  • Miniminx71's Photo
    Miniminx71
    There you go. Makes no odds then really. Might as well have a look :-)
    Feb 26 2015 10:20 PM
  • 1984mini25's Photo
    1984mini25
    but, even if it was a number of years ago the clutch plate has only done just over 20k and I can't see that all being down to having to do hill starts all the time
    Feb 26 2015 10:25 PM
Photo

AlexMozza

Spent a few hours stripping a 997 Cooper engine, not a bad afternoons job!
Feb 26 2015 09:33 PM
  • Spider's Photo
    Spider
    rare beast these days. Did it have the pressure fed primary gear and coil spring clutch?
    Feb 27 2015 04:57 AM
Photo

Thorpsta

Signed up for ToughMudder, possibly just made a stupid decision >_>
Feb 26 2015 08:59 PM
  • Thorpsta's Photo
    Thorpsta
    Put my name down for the craic with the lads at camp, who have now bailed out haha. Might see if I can fundraise a bit of money for H4H or something
    Feb 26 2015 09:20 PM
  • Steve220's Photo
    Steve220
    Its awesome. I've done it every year and will continue to! Do it for RAFBF if you can, H4H gets millions each year and lesser charities still need funding.
    Feb 26 2015 10:19 PM
  • Thorpsta's Photo
    Thorpsta
    Decided to go for Scotties Little Soldiers, they're based about 20 miles up the road from me
    Feb 27 2015 07:22 AM
Photo

lyndseyp27

Went to a work meeting at Lincoln Hospital today, ended up speaking to the Procurement guy about his first car (classic mini) and my own for a good half an hour haha. I do love my job at times.
Feb 26 2015 08:58 PM
  • Udo's Photo
    Udo
    I think it was head of estates I used to deal with

    Feb 26 2015 09:26 PM
  • lyndseyp27's Photo
    lyndseyp27
    It was previously a guy called David from what i could gather but he left a couple of months ago :)
    Feb 26 2015 09:28 PM
  • darekforest's Photo
    darekforest
    On your next trip to Lincoln dont forget to stop in Newark for cup of tea/coffee :)
    Feb 26 2015 11:29 PM
Photo

markyB

Had an unexpected job interview this evening, fingers crossed !
Feb 26 2015 08:31 PM
  • lyndseyp27's Photo
    lyndseyp27
    Good luck!
    Feb 26 2015 08:38 PM
  • markyB's Photo
    markyB
    Thanks Lyndsey , got the job !
    Feb 28 2015 12:50 PM
  • lyndseyp27's Photo
    lyndseyp27
    Well done!!
    Feb 28 2015 06:41 PM
Photo

pusb

Will 12" wheels fit on 7.5 disc brakes?
Feb 26 2015 07:24 PM
  • Fast Ivan's Photo
    Fast Ivan
    yes again
    Feb 26 2015 07:50 PM
  • willava182's Photo
    willava182
    yes but i found the breaking somewhat disappointing :/
    Feb 26 2015 08:00 PM
  • pusb's Photo
    pusb
    Thanks, its only a temp thing. Cant afford the brake conversion kit and new wheels at the same time!
    Feb 26 2015 08:22 PM
Photo

pusb

Will 12" wheels fit on 7.5 disc brakes?
Feb 26 2015 07:24 PM
  • The Matt's Photo
    The Matt
    Yes
    Feb 26 2015 07:40 PM
Photo

kingbenvolio

£180 for two new tyres.. Ouch! Looks like we're going without food this month! ;D
Feb 26 2015 06:00 PM
  • cal844's Photo
    cal844
    On what vehicle! I can buy 4 tyres for that price!
    Feb 26 2015 06:57 PM
  • kingbenvolio's Photo
    kingbenvolio
    The mini! Yoko A048-R; too ocd to have mismatched tyres! Plus others would be a slightly different size.
    Feb 26 2015 07:03 PM