16 replies to this topic

[superted87]

Hi guys

having a clear out and got 3 heads up for grabs. They are all in need of checking over and refurb so prices to match.

Blue - 12G202 - £40 ono
Red - 1275 std - £35 ono
Yellow - CAM 4810 (998cc) - £40

All prices are negotiable, and i live in portsmouth area and oxford so can deliver up the A34.

Cheers

[4l1x]

hi mate be interested in the std 1275 head, whats its condition?

[pierres]

PM'd

[Willthewelder]

Which one would be an improvement on my standard 998 head?

[superted87]

Ok so....

The std 1275 head came off an engine that we had running a while ago. Cant guarantee any of them as they have been in my spares locker for a couple of years gathering dust (not rust).

as for improving a 998cc engine, i think you can fit a 1275 head on and then pocket the block to increase your performance. have a look on here mate and someone will help you out.

i am open to couriering them so let me know via PM if you guys want them.

Cheer

[tb205gti]

a ported 12G202 can also be an improvement on a 998.

[superted87]

The blue head is now sold

The red head has been inspected and is a nie and clean, recently skimmed 12g940 head. I cleaned all the dust of and there is a lovely head underneath.

Cheers

[GlynC]

Hi Mate

What condition is the yellow one in, I am after one for a 998 A+ I think this is the correct version which was standard on the 998
does it have the bypass fitting under the thermostat section?
if you have any other pictures let me know
also what days are you up the A34 Oxford?

Cheers
Glyn

[superted87]

Due to a miriad of reasons, they are all for sale again !!!!!!

[superted87]

Bump, all for sale and open to offers guys. need rid of them relatively soon !

[pierres]

PM'D

[pierres]

Does the 202 have the water bypass tube

[sdjones121]

PM'd. Interested in the 1275.

[superted87]

bump , all available!! still!!!

[RonH]

Hi SuperTed,
shame I didn't read this earlier...I just discovered my project head (stage 3 big valve 1275) is a door stop (cracked through from exhause to inlet on on cylinder) and forked out on an ebay special described as 'good condition and serviceable' which arrived with a burnt valve and seat and exhaust valves so resessed i had to go mining to find them. Cost me £75 for the head and will cost £180 for new seats.

Where abouts are you geographically and, do you know approx how much a courier would cost to Winchester area?

Is the 1275 a 35mm or 33 mm valver?

Cheers

Ron