is it hard to swap the standard double one or single with the triple clocks the original dont have revs but the three dial one does have a rev counter. thanks
Rover Mini
Started by
minimitch93
, Jul 08 2010 09:36 PM
6 replies to this topic
#2
Twincam
-
- Members
-
- 1,742 posts
Camshaft & Stage Two Head
- Location: Londinium
- Local Club: SMAG
Posted 08 July 2010 - 09:59 PM
You could always wire in your own seperate rev counter and then locate a pod - its done quite a few times for people who want to retain the standard centre set up.
#3
blackbelt1990
-
- Members
-
- 2,625 posts
Up Into Fourth
- Location: Halifax
- Local Club: Minimus Maximus
Posted 09 July 2010 - 08:03 AM
If you've got two clocks infront of the steering wheel then it's easy to change to 3. The wirings already there but you will need to change the bracket that holds them for a wider 3 clock one 
#4
minimitch93
-
- Noobies
-
- 77 posts
Stage One Kit Fitted
Posted 09 July 2010 - 08:47 AM
cool cheers matey.
#5
JayBox
-
- Members
-
- 150 posts
Mini Mad
- Location: Bath
- Local Club: Mendip Minis
Posted 09 July 2010 - 02:46 PM
I think I have the rev counter wire-ing too. How hard is it to change from a standard 2-dial (speedo & fuel/main beam/temp) to a massive one in the center of the dash?
#6
blackbelt1990
-
- Members
-
- 2,625 posts
Up Into Fourth
- Location: Halifax
- Local Club: Minimus Maximus
Posted 09 July 2010 - 05:53 PM
I think I have the rev counter wire-ing too. How hard is it to change from a standard 2-dial (speedo & fuel/main beam/temp) to a massive one in the center of the dash?
MiniSpares do a plug and some wire. You plug your original multi-plug into the "new loom" and wire that to a centre pod. Then, as above, you'd just need to remove the original brackets.
#7
JayBox
-
- Members
-
- 150 posts
Mini Mad
- Location: Bath
- Local Club: Mendip Minis
Posted 09 July 2010 - 06:25 PM
I think I have the rev counter wire-ing too. How hard is it to change from a standard 2-dial (speedo & fuel/main beam/temp) to a massive one in the center of the dash?
MiniSpares do a plug and some wire. You plug your original multi-plug into the "new loom" and wire that to a centre pod. Then, as above, you'd just need to remove the original brackets.
Thankkks
Nice black spot you have on the side your mini by the way 
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
